Position of Scanner
You can change the position of the scanner according to the usage.
!
Caution:
Be careful not to pinch your ngers or any cables when you change the position of the scanner. Injury or damage
may occur.
See the Related Information page for more information on the combinations of scanner positions and originals.
Vertical path position
When scanning multiple sheets of standard-size originals, or when scanning thin paper or receipts, pull the
scanner position selector to tilt the scanner forward into the vertical path position. When scanning in the vertical
path position, originals loaded in the input tray are ejected to the output tray at the top of the scanner.
When the vertical path position is changed, the light on the control panel turns o.
Scanner Basics
>
Position of Scanner
24
To Next Page
Loading...
