Epson ES-C320W - Placing Laminated Cards

6. Adjust the edge guides to t the edges of the cards so that there are no gaps. Otherwise, the original may be fed
skewed.
Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. e edge guides should be
aligned so that they lightly touch the edges of the original.
❏ To scan plastic cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Epson ScanSmart, you can open the Epson Scan 2 window by pressing the Settings button >
Scanner Settings tab > Scan Settings.
On the Main Settings tab in Epson Scan 2, select Plastic Card in Document Size or select O in Detect Double
Feed. See the Epson Scan 2 help for details.
If you have not disabled Detect Double Feed on the Epson Scan 2 screen and a double feed error occurs, remove the
cards from the ADF and reload them.
Related Information
& “Placing Laminated Cards” on page 64
Placing Laminated Cards
Note:
Make sure there is enough space in front of the scanner for the ejected originals.
1. Make sure the scanner position light ( ) is on.
Placing Originals > Placing Originals in the Scanner > Placing Laminated Cards
64