Epson ES-C320W - Placing a Passport

Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. e edge guides should be
aligned so that they lightly touch the edges of the original.
❏ To scan laminated cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Epson ScanSmart, you can open the Epson Scan 2 screen by clicking the Settings button >
Scanner Settings tab > Scan Settings.
· To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan
laminated card. See the Epson Scan 2 help for details.
· Select the Main Settings tab > Detect Double Feed > O. See the Epson Scan 2 help for details.
If you have not disabled Detect Double Feed on the Epson Scan 2 screen and a double feed error occurs, remove the
cards from the ADF and reload them.
Placing a Passport
Note:
Make sure there is enough space in front of the scanner for the ejected originals.
1. Make sure the scanner position light ( ) is on.
If the scanner position light ( ) is o, pull the scanner position selector to tilt the scanner back.
Placing Originals > Placing Originals in the Scanner > Placing a Passport
67