Epson ES-C320W - Initializing the Network Settings from the Control Panel

1.
Press the
button for more than 3 seconds to disable a Wi-Fi and AP mode connection.
e
light and light turn o when these are disabled.
Note:
Press the
button to re-connect Wi-Fi and AP mode.
Initializing the Network Settings from the Control Panel
You can restore all network settings to their defaults.
e
administrator password and user name will also be reset to their initial values at the time of purchase. If panel
lock is set, the panel lock feature will be turned o.
1. Turn o the scanner.
2. While holding down the
button, press the button until light and light turn on simultaneously.
e
light and light ash alternately and then turn o when restoration is complete.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Initial …
167