Related Information
& “Placing Long Paper” on page 56
Scannable Receipts
ese are the specications for receipts that you can scan.
Size Thickness Loading Capacity and Thickness
Width: 50.8 to 215.9 mm (2.0 to 8.5
in.)
Length: 50.8 to 3,048 mm (2.0 to
120.0 in.)
* 1
53 to 77 g/m ❏ For the vertical path position
Thickness of the stack of originals: under 2.4
mm (0.09 in.)
20 sheets
*2
❏ For the straight path position
1 sheet
*1 Switch the scanner position according to the length of the receipt to be scanned.
*2 When scanning receipts in the vertical path position, we recommend extending the paper output support in both places.
When Scanning Receipts (Check the Position of the Scanner)
❏ When scanning receipts that are shorter than 393.7 mm (15.5 inches), scan in the vertical path position.
❏ When scanning receipts that are longer than 393.7 mm (15.5 inches), place the scanner in the straight path
position and load only one original at a time.
Related Information
& “Placing Standard Size Originals” on page 47
& “Placing Long Paper” on page 56
Placing Originals
>
Specications for Originals that can be Scanned
>
Scannable Receipts
40