Epson ES-C320W - Loading Batches of Originals with Different Paper Types and Sizes

Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. e edge guides should be
aligned so that they lightly touch the edges of the original.
❏ Do not use a scratched Carrier Sheet or a Carrier Sheet that has been scanned more than 3,000 times.
❏ If you cannot nd a Document Size that matches the original to be scanned, you need to make settings on the Epson
Scan 2 screen.
When you are using Epson ScanSmart, you can open the Epson Scan 2 screen by clicking the Settings button >
Scanner Settings tab > Scan Settings.
Select Auto Detect on the Epson Scan 2 screen, or select Customize to create a custom document size.
❏ When scanning with a Carrier Sheet, select Auto Detect as the Document Size setting in Epson Scan 2 to
automatically scan the image while applying Paper Skew as the Correct Document Skew setting.
❏ Only use a Carrier Sheet designed for your scanner. e Carrier Sheet is automatically recognized by the scanner by
detecting two small rectangular holes on the leading edge. Keep the holes in the Carrier Sheet clean and uncovered.
Related Information
& “Carrier Sheet Codes” on page 34
Loading Batches of Originals with
Dierent
Paper Types and Sizes
You can place and scan batches of
dierent
size originals (50.8×50.8 mm (2.0×2.0 inches) to A4 or letter size) up to
a total thickness of 2.4 mm (0.1 inches).
Placing Originals > Placing Originals in the Scanner > Loading Batches of Originals with Dierent Paper Types an …
83