Epson ES-C320W - Application for Configuring Scanner Operations (Web Config)

❏ Windows 10
Click the start button, and then select Epson Soware > EPSON Soware Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs > Epson Soware > EPSON Soware Updater.
Starting on Mac OS
Select Go > Applications > Epson Soware > EPSON Soware Updater.
Application for Conguring Scanner Operations (Web Cong)
Web Cong is an application that runs in web browsers, such as Microso Edge and Safari, on a computer or a
smart device. You can
conrm
the scanner status or change the network service and scanner settings. To use Web
Cong, connect the scanner and the computer or device to the same network.
e
following browsers are supported. Use the latest version.
Microso Edge, Windows Internet Explorer, Firefox, Chrome, Safari
Note:
You may be prompted to enter the administrator password while using this device. See the following for details on the
administrator password.
“Notes on the Administrator Password” on page 12
Related Information
& “Cannot Access Web
Cong
” on page 135
How to Run Web Cong in a Web Browser
e scanner comes with built-in soware called Web Cong (a Web page where you can make settings). To access
Web Cong, simply enter the IP address of a network-connected scanner in your Web browser.
1. Check the scanner's IP address.
Example IP address: 192.168.100.201
2. Launch a Web browser from a computer or a smart device, and then enter the scanner's IP address in the
address bar.
Format: http://scanner’s IP address/
Example: http://192.168.100.201/
If a warning screen is displayed in your browser, you can safely ignore the warning and display the Web page
(Web
Cong
). Since the scanner uses a self-signed
certicate
when accessing HTTPS, a warning is displayed
on the browser when you start Web
Cong
; this does not indicate a problem and can be safely ignored.
Depending on your browser, you may need to click on Advanced Settings to view the Web page.
Scanner Basics > Information on Applications > Application for Conguring Scanner Operations (Web Cong)
30