Epson ES-C320W - Placing Irregular Shaped Originals

Note:
❏ Envelopes that are not cut cleanly at the ap edge when they are opened may not be scanned correctly.
❏ Envelopes that have not yet been sealed can be loaded with the ap open and facing up.
6. Adjust the edge guides to t the edges of the envelope so that there are no gaps. Otherwise, the envelope may
be fed skewed.
Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. e edge guides should be
aligned so that they lightly touch the edges of the original.
❏ We recommend selecting the appropriate rotation angle or Auto as the Rotate setting in the application.
❏ When scanning envelopes, make the appropriate settings on the Epson Scan 2 screen.
When you are using Epson ScanSmart, you can open the Epson Scan 2 screen by clicking the Settings button >
Scanner Settings tab > Scan Settings.
Select Main Settings tab > Detect Double Feed > O. See the Epson Scan 2 help for details.
If you have not disabled Detect Double Feed on the Epson Scan 2 screen and a double feed error occurs, remove the
envelopes from the ADF and reload them.
Placing Irregular Shaped Originals
Note:
Make sure there is enough space in front of the scanner for the ejected originals.
1. Make sure the scanner position light ( ) is on.
Placing Originals > Placing Originals in the Scanner > Placing Irregular Shaped Originals
79