Epson ES-C320W - Connecting the Scanner to an IEEE802.1 X Network

Conguring a Certicate for IPsec/IP Filtering
Congure the Client Certicate for IPsec/IP Filtering. When you set it, you can use the certicate as an
authentication method for IPsec/IP Filtering. If you want to congure the certication authority, go to CA
Certicate.
1. Access Web Cong and then select the Network Security tab > IPsec/IP Filtering > Client Certicate.
2. Import the certicate in Client Certicate.
If you have already imported a
certicate
published by a
Certication
Authority, you can copy the
certicate
and use it in IPsec/IP Filtering. To copy, select the
certicate
from Copy From, and then click Copy.
Related Information
& “How to Run Web Cong in a Web Browser” on page 30
Connecting the Scanner to an IEEE802.1X Network
Conguring an IEEE802.1X Network
When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1. Access Web
Cong
and then select the Network Security tab > IEEE802.1X > Basic.
2. Enter a value for each item.
If you want to use the scanner on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
3. Click Next.
A conrmation message is displayed.
4. Click OK.
e
scanner is updated.
IEEE802.1X Network Setting Items
Items Settings and Explanation
IEEE802.1X (Wi-Fi) The connection status of IEEE802.1X (Wi-Fi) is displayed.
Connection Method The connection method of a current network is displayed.
EAP Type Select an option for an authentication method between the scanner and a RADIUS server.
EAP-TLS You need to obtain and import a CA-signed certicate.
PEAP-TLS
PEAP/MSCHAPv2 You need to congure a password.
EAP-TTLS
Administrator Information > Advanced Security Settings > Connecting the Scanner to an IEEE802.1X Network
198