14. Wipe the pickup roller. Wipe with a so, lint-free cloth dampened with a small amount of dedicated cleaner or
water.
c
Important:
Use only a moist cloth to clean the roller. Using a dry cloth may damage the surface of the roller.
15. Install the pickup roller.
See “Replacing the Roller Assembly Kit” for more details on installing.
16. Close the scanner cover with both hands. Next, close the input tray.
17. Reset the scan number by using the Epson Scan 2 Utility.
Maintenance
>
Cleaning Inside the Scanner
116
To Next Page
Loading...
