Epson ES-C320W - Page 28

Indicator Status Solutions
Flashing fast
Flashing fast
Flashing fast
Flashing fast
Flashing fast
A fatal error has occurred. Turn the power o and on again. If the
error continues to occur, contact your
dealer.
O
On
On
On
On
The scanner has started in recovery mode because
the rmware update failed.
The scanner has started in recovery
mode because the rmware update
failed.
1. Connect the computer and the
scanner by USB.
(During recovery mode, you cannot
update the rmware over a network
connection.)
2. Download the latest
rmware
from
the Epson home page, and then start
the update.
Network Errors
Indicator Status Solutions
Flashing
On
An access point setting error has occurred.
Press the
button to clear the error.
Flashing
Flashing
An access point settings error has occurred (a
security error).
Flashing (blue)
Flashing
A network connection error has occurred (the Date
and Time has not been set correctly).
Set the correct Date and Time in Web
Cong.
Flashing slowly
(white)
Flashing
The Wi-Fi connect button and the Wi-Fi on/o
button are locked (Panel Lock) and network
settings cannot be
congured.
Release Panel Lock. See Related
Information below for more details.
Related Information
& “Application for Conguring Scanner Operations (Web Cong)” on page 30
& “Connecting the Scanner to the Network” on page 99
& “Removing Jammed Originals from the Scanner” on page 145
& “Locking the Buttons on the Control Panel (Panel Lock)” on page 173
Scanner Basics > Buttons and Lights on the Control Panel > Error Indicators
28