Type of Original Size Thickness Loading Capacity of the
Carrier Sheet
Originals that cannot be
loaded directly into the
scanner
A3
*1
A4
B4
*1
Letter
Legal
*1
B5
A5
B6
A6
A8
Custom size:
❏ Width: up to 431.8 mm (17 in.)
*2
❏ Length: up to 297 mm (11.7 in.)
*3
0.3 mm (0.01 in.) or
less
(Excluding the
thickness of the
Carrier Sheet)
1 sheet
*1 Fold in half to place.
*2 Originals that are wider than 215.9 mm (8.5 in.) need to be folded in half.
*3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the
scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the
application.
When Scanning Using a Carrier Sheet (Check the Position of the Scanner)
When scanning using a Carrier Sheet, scan in the straight path position.
Related Information
& “Carrier Sheet Codes” on page 34
& “Placing Large Size Originals” on page 52
& “Placing Irregular Shaped Originals” on page 79
Placing Originals
>
Specications for Originals that can be Scanned
>
Specications for Originals Using the Carrie
…
43