Epson LX-810

Commands Arranged by Topic
User-defined characters
ASCII
Dec. Hex. Description
ESC & nn 38 26
ESC: 0
n 0 58 3A
ESC % 0/1 37 25
Graphics
ASCII
Dec. Hex.
Define User-Defined Characters
ESC & 0 nl n2 al dd
n1 = code for first character (58-63)
n2 = code for last character (58-63)
al = use top (128) or bottom (0) 8
pins of print head
dd = In draft mode, 1 byte required
for each of the 11 columns of each
character being defined. In NLQ
mode, 3 bytes required for each of 11
columns of each character being
defined.
Copy ROM into RAM
0:Roman
1:Sans Serif
Select User-Defined Set
0:Normal set
l:User-defined set
Description
ESC K n1 n275 4B
Select Single-Density Graphics Mode
Total columns = n1 +
(n2 X 256)
ESC L n1 n276 4C
Select Double-Density Graphics Mode
Total columns =
nl + (n2 X 256)
ESC Y n1 n289 59 Select High-Speed Double-Density
Graphics Mode
Total columns =
nl + (n2 X 256)
Command Summary 8-9