Epson LX-810

Commands Arranged by Topic
ASCII Dec. Hex. Description
ESC Z n1 n2 90 5A Select Quadruple-Density
Graphics Mode
Total columns = n1 + (n2 X 256)
ESC *m n1 n2 42 2A
Select Graphics Mode
Total columns = n1 + (n2 X 256)
* Adjacent dots cannot be printed in this mode.
ESC ? s n2 63 3F Reassign Graphics Mode
s is character (K, L, or Z) to be
reassigned to mode n (O-6)
ESC ^ m n1 n2 94 5E Select 9-Pin Graphics Mode
m: Print density (0 for single, 1
for double)
Total columns = nl + (n2 X 256)
8-10 Command Summary