Epson LX-810 User Guide

Cut-Sheet Feeder
Paper handling
1.
Pull the left and right rear tabs on the cut-sheet feeder forward
until the paper guides retract and lock open to allow for paper
loading.
2.
Slide the left paper guide to where the fin on the edge guide
aligns with the arrow on the front panel. Next, slide the right
paper guide to roughly match the w
3.
Take a stack of paper and fan it. Tap the side and bottom of
the paper on a flat surface to even up the stack.
CAUTION: Do not use multi-part forms, carbon paper,
or labels in the cut-sheet feeder.
4-4
Using the Printer Options

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)