Epson LX-810 User Guide

Pull Tractor
7. If the paper does not fit exactly onto the tractor pins, press on
the pull tractor knob and turn it in the desired direction until
the paper fits properly.
8. Make sure that the paper-release lever is set forward to the
continuous paper position.
CAUTION: Make sure that the pull tractor’s sprocket
units are aligned with those of the built-in push tractor.
9. Separate the two halves of the printer cover by pressing on the
tabs and pulling off the clear plastic half.
Using the Printer Options
4-11

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)