Epson RC700 Series Original Instructions

Installation 2. Installation
RC700 Series Rev.3 9
C12
Where to hold
: The part other than the part that is should not touch
Minimum number of people
: 2 people
Do not hold
: Bottom of the base (slashed part)
N2
Where to hold : Under the arm and bottom of the base *
* When hold bottom of the base, be careful not caught
your hands or fingers.
Minimum number of people
: 2 people
Do not hold
: -
N6
Where to hold
: Under the arm and bottom of the base *
* When hold bottom of the base, be careful not
caught your hands or fingers.
Minimum number of people
: 2 people
Do not hold
: -

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4