Epson RC700 Series Original Instructions

RC700 Series Rev.3 v
Structure of Robot System
The Drive Unit RC700DU can be used with the following version.
EPSON RC+ 7.0 Ver.7.1.0 or later
Control Unit RC700-A
Drive Unit RC700DU-A can be used with the following version.
EPSON RC+ 7.0 Ver.7.1.2 or later
Each manipulator can be used with the following version.
C4 Series : EPSON RC+ 7.0 Ver.7.0.0
C8 Series (C8XL) : EPSON RC+ 7.0 Ver.7.1.3
C8 Series (C8, C8L) : EPSON RC+ 7.0 Ver.7.1.4
C8 Series (wall mounting) : EPSON RC+ 7.0 Ver.7.2.0
C12 Series : EPSON RC+ 7.0 Ver.7.4.6
N2 Series : EPSON RC+ 7.0 Ver.7.2.0
N6 Series (N6-A1000**) : EPSON RC+ 7.0 Ver.7.3.4
N6 Series (N6-A850**R) : EPSON RC+ 7.0 Ver.7.4.1
G1, G3, G6, G10, G20, RS Series : EPSON RC+ 7.0 Ver.7.1.2

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4