vi RC700 Series Rev.3
The Manuals of This Product
The following are typical manual types for this product and an outline of the descriptions.
Safety Manual (book, PDF)
This manual contains safety information for all people who handle this product. The
manual also describes the process from unpacking to operation and the manual you should
look at next.
Read this manual first.
- Safety precautions regarding robot system and residual risk
- Declaration of conformity
- Training
- Flow from unpacking to operation
RC700 series Manual (PDF)
This manual explains the installation of the entire robot system and the specifications and
functions of the controller. The manual is primarily intended for people who design robot
systems.
- The installation procedure of the robot system (specific details from unpacking
to operation)
- Daily inspection of the controller
- Controller specifications and basic functions
xx series Manual (PDF) (xx: Manipulator series name)
This manual describes the specifications and functions of the Manipulator. The manual is
primarily intended for people who design robot systems.
- Technical information, functions, specifications, etc. required for the
Manipulator installation and design
- Daily inspection of the Manipulator
Status Code/Error Code List (PDF)
This manual contains a list of code numbers displayed on the controller and messages
displayed in the software message area. The manual is primarily intended for people who
design robot systems or do programming.
RC700 series Maintenance Manual (PDF)
xx series Maintenance Manual (PDF) (xx: Manipulator series name)
This manual describes the details of maintenance etc. The manual is intended for people
who perform maintenance.
- Daily inspection
- Replacement and repair of maintenance parts
- The method of firmware update and controller setting backup etc.
To Next Page
Loading...
Need help?
General
