Epson RC700 Series - Page 96

Functions 1. Specifications
78 RC700 Series Rev.3
*1 EPSON RC+ 7.0 supports the following OS.
Windows 8.1 Pro (EPSON RC+ 7.0 Ver.7.1.0 or later
Windows 10 Pro (EPSON RC+ 7.0 Ver.7.2.0 or later
*2 Up to three drive unit can be connected.
*3 Any one of the manipulators can be controlled.
Available combinations are as follows. (
: connectable)
C4
C8
C12
G
RS
N2
N6
RC700

-
-
-
-
-
-
RC700-A







RC700DU

-
-
-
-
-
-
RC700DU-A


-


-

Drive Unit is the auxiliary unit connected with the control unit using the special
cable.
Drive Unit cannot operate alone.
Up to three Drive Units can be used per robot system.
A: Control Unit and 1st Drive Unit (CU-DU1)
B: 1st Drive Unit and 2nd Drive Unit (DU1-DU2)
C: 2nd Drive Unit and 3rd Drive Unit (DU2-DU3)
DU2
B
A
DU IN
DU1
CU
DU IN
DU OUT
DU OUT
DU3
C
DU IN
DU OUT
*4 Any one of the Teach pendant can be controlled.
TP3 cannot be connected to RC700.
*5 When connecting to RC700-A, a dedicated conversion cable is required.

NOTE