Epson SC-F9200 series

SC-F9200 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 96
SE Group Confidential (Related Staff Only)
PAPER FEED MECHANISM / HEATER MECHANISM
ROLL UNIT
Start
“3.4.6.1 Media Loading Lever”
(p210)
“3.4.6.2 Media Loading Lever
Sensor” (p211)
“3.4.6.3 PF Motor” (p213) “3.4.6.5 PF Encoder” (p215) “3.4.6.7 PF Timing Belt” (p217)
“3.4.3.7 Left Rear Cover” (p110)
“3.4.3.8 Left Upper Cover” (p111)
“3.4.3.10 Left Cover” (p114)
“3.4.6.6 PF Scale” (p216)
“3.4.7.1 After Heater” (p233)
“3.4.3.3 Lower Ink Holder” (p106)
“3.4.6.9 Suction Fan” (p221)
“3.4.6.10 PE Sensor” (p224)
“3.4.6.8 Driven Roller Assy”
(p218)
“3.4.7.2 Cooling Fan” (p235)
“3.4.6.12 PF Roller Center
Support” (p227)
“3.4.6.4 PF Motor Cooling Fan”
(p214)
“3.4.3.3 Lower Ink Holder” (p106)
“3.4.7.2 Cooling Fan” (p235)
“3.4.7.1 After Heater” (p233)
Start
“3.4.8.1 Roll Unit” (p236)
“3.4.8.4 Sub-F Board (Roll)”
(p239)
“3.4.8.2 Roll Receiver Assy” (p237) “3.4.8.3 Roll Paper Holder” (p238)
“3.4.8.5 ATC Motor” (p241)