Rev. C General Information 1-1
TM-H6000III Technical Reference Guide
Chapter 1
General Information
1.1 Features
The TM-H6000III is a high-quality POS printer that can print on slip, validation, and receipt
paper (paper roll).
Note:
Validation, MICR, and endorsement printer functions are factory options. Validation and endorsement
functions cannot be installed on the same printer.
1.1.1 Slip/ Validation Section
❏ An optional Magnetic Ink Character Recognition (MICR) reader that enables the printer to
perform consecutive reading and processing of MICR characters
❏ An optional endorsement printer (E/P) that enables single-pass high speed printing of
endorsements.(The endorsement printer cannot be installed on a printer with the validation
function.)
❏ Single-pass processing for checks eliminates the need to reverse the check paper for printing
an endorsement.(The validation function model doesn't have an endorsement printer.)
❏ High throughput using bidirectional, minimum distance printing.
❏ Mechanical form stopper for stable slip printing.
❏ Two ways are available for slip paper loading (drop- in for validation, and front insertion for
slip (validation function is factory option))
❏ Page mode for flexibility in printing formats
1.1.2 Receipt Section
❏ High-speed printing with batch processing
❏ High-speed graphic printing
❏ Autocutter provides easy user operation
❏ Easy drop-in paper roll loading
❏ PDF417 symbols (2-dimensional code) printing is possible
❏ Two-color printing is possible with two-color paper
To Next Page
Loading...
