Rev. C General Information 1-13
TM-H6000III Technical Reference Guide
1.4.3.3 Inserting direction and endorsement printing
❏ Insert the check with the surface printed with the magnetic ink upward, following the slip
side guide.
❏ The printer can perform endorsement printing.
Area of personal check where MICR character recognition is impossible
❏ To print endorsements in the specified area (within 38.1 mm {1.5”} from the top), set the
print position for the last line so that it is printed at least 3 mm {0.118”} above the bottom of
the printable area (Especially when the printer is used near the display device, the user is
required to check the recognition rate of the MICR).
To Next Page
Loading...
