1-8 General Information Rev. C
1.4.1.2 Printable Area for slip
Printable area for slip paper
*2 The length from the form stopper to the tip of the paper.
*3 The length from the tip of the paper to the first printing line position.
*4 The printable area after the slip BOF sensor detects the end of the paper. (The bottom margin
must be considered for a real printable area.)
*5 Bottom margin (calculated value).
Note:
Numeric values used here are typical values; consider this for the user design for the starting position in
the paper feeding direction.
5.6
To Next Page
Loading...
