1-30 General Information Rev. C
Dip Switch 2-3, 2-4 If the print density is set to level 3
or 4, printing speed is usually
reduced.
If the print density is set to level 3
or 4, printing speed is as below.
max 180mm/s(at24V, 25°C
Print density level3)
max 170mm/s(at24V, 25°C
Print density level4)
Weight Approximately 5.8 kg Approximately 5.3 kg
Option Roll paper spacer for 58mm or
60mm PG-58
Not available
Specification related items TM-H6000II TM-H6000III
To Next Page
Loading...
