Epson TM-H6000III Technical Reference Guide

Rev. C Setup 3-25
TM-H6000III Technical Reference Guide
1. Install EPSON Advanced Printer Driver
Execute the installer “ATM###E.exe,“ and select modules which you need (“###” is a version
number). The recommended modules are shown below. Refer to the installation manual for
details.
Note:
For manuals, sample programs, and utilities, you have to download exe files separately.
2. Set up the printer port
After installing APD, you need to adjust the printer port setting for the printer interface
model. See the Installation manual for details.
Note:
When you use the serial interface model printer, you need to adjust serial communication setting
between printer and printer driver. See “Serial interface model” (page 3-17) for information on the
settings.
3. Test print
Execute test print from the “property” of printer to confirm the setting. If the test print is not
correct, please see the “Notes” on the “User’s Manual” and “Status API Reference Manual”
to solve the your problem.
Note:
You can use the printer with the sample program (written in Microsoft Visual Basic, Visual C++).
The sample program is provided separately.
EPSON TM-H6000III Slip:
This module (printer driver) is needed for printing on the
face of a slip.
EPSON TM-H6000III Endorsement:
This module (printer driver) is need for printing on the
back of a slip. (This module is for the endorsement printer
installed model only.)
EPSON TM-H6000III Validation:
This module (printer driver) is need for printing on
validation paper. (This module is for the validation printer
installed model only.)
EPSON TM-H6000III Receipt:
This module (printer driver) is need for printing on
receipt.
EPSON TM-H6000III Reduce35:
This module (printer driver) is usable for printing A4 size
document on receipt with reduction.
Status API:
This module is need for monitoring the printer. This
module provides API to monitor the printer’s status.
USB driver:
This module (device driver) is need for the USB interface
model printer.

Epson TM-H6000III Specifications

General

Dimensions (WxDxH)	186 x 298 x 185 mm
USB port	Yes
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Type	POS printer
Print speed	63 lps
Character size	0.99 x 2.4 mm
Print technology	Dot matrix
Safety	UL, CSA, TÜV
Certification	VCC1, FCC, CE
Country of origin	China
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Product color	Black
Maximum roll diameter	83 mm
Supported paper width	80 mm
Printing media thickness	60 - 90 µm
Ethernet LAN	No
Input current	1.8 A
Power supply type	DC
Pallet width	800 mm
Pallet height	1675 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	40 pc(s)
Quantity per pallet (UK)	50 pc(s)
Quantity per pallet layer	8 pc(s)
Quantity per pallet layer (UK)	10 pc(s)
Package depth	382 mm
Package width	285 mm
Package height	305 mm
Package weight	6600 g
Quantity per pack	1 pc(s)