Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
134 133
TM-T88III series
Specification
(STANDARD)
B
• When the printer is disabled by ESC = (Select peripheral device), the four status bytes are
transmitted whenever the status changes.
• When using DLE EOT, GS I
II
I, or GS r, the status transmitted by these commands and ASB
status must be differentiated, according to the procedure in Appendix G,
Transmission Status
Identification
.
• The status to be transmitted are as follows:
First byte (printer information)
Bit Off/On Hex Decimal Status for ASB
0 Off 00 0 Not used. Fixed to Off.
1 Off 00 0 Not used. Fixed to Off.
2 Off 00 0 Drawer kick-out connector pin 3 is LOW.
On 04 4 Drawer kick-out connector pin 3 is HIGH.
3 Off 00 0 Online.
On 08 8 Offline.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 Cover is closed.
On 20 32 Cover is open.
6 Off 00 0 Paper is not being fed by using the PAPER FEED button.
On 40 64 Paper is being fed by using the PAPER FEED button.
7 Off 00 0 Not used. Fixed to Off.
To Next Page
Loading...
