If the installer is used, setting of the printer’s network or computer, installation of the driver, and making the print
queue are performed automatically.
Setting Up Standard TCP/IP Ports - Windows
Set up the Standard TCP/IP port on the print server, and create the print queue for network printing.
1. Open the devices and printers screen.
❏ Windows 10/Windows Server 2016
Right-click the start button or press and hold it, and then select Control Panel > Devices and Printers .
❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012
Desktop > Settings > Control Panel > Hardware and Sound or Hardware > Devices and Printers.
❏ Windows 7/Windows Server 2008 R2
Click start > Control Panel > Hardware and Sound (or Hardware) > Devices and Printers.
❏ Windows Vista/Windows Server 2008
Click start > Control Panel > Hardware and Sound > Printers.
❏ Windows XP/Windows Server 2003 R2/Windows Server 2003
Click start > Control Panel > Printers and Other Hardware > Printers and Faxes.
2. Add a printer.
❏ Windows 10/Windows 8.1/Windows 8/Windows Server 2016/Windows Server 2012 R2/Windows Server
2012
Click Add printer, and then select e printer that I want isn't listed.
❏ Windows 7/Windows Server 2008 R2
Click Add printer.
❏ Windows Vista/Windows Server 2008
Click Install Printer.
❏ Windows XP/Windows Server 2003 R2/Windows Server 2003
Click Install Printer, and then click Next.
3. Add a local printer.
❏ Windows 10/Windows 8.1/Windows 8/Windows Server 2016/Windows Server 2012 R2/Windows Server
2012
Select Add a local printer or network printer with manual settings, and then click Next.
❏ Windows 7/Windows Server 2008 R2/Windows Vista/Windows Server 2008
Click Add a local printer.
❏ Windows XP/Windows Server 2003 R2/Windows Server 2003
Select Local printer attached to this computer, and then click Next.
Administrator's Guide
Function Settings
28
To Next Page
Loading...
Need help?
General
