3. Wipe the glass part inside the ADF using a so cloth.
Checking the Circuit Breaker
is product has a circuit breaker. If a short-circuit occurs within the printer, the power supply shuts o
automatically to prevent electric shocks and res. Perform the following operation about once a month.
e breaker is subject to change without prior notice in order to improve the product. Even if the breaker notations
or the position of the test button change, the steps of the procedure are the same.
1.
Press the
P
button to turn o the printer.
Keep the power plug connected to the outlet.
User's Guide
Maintenance
200