Command Line Interface
110 1553-CNH 160 0787 Uen PA2 2005-09-23
Syntax
ecn spanning-tree hello-time <hello_time>
Arguments:
• hello-time <hello_time> - Time in seconds, (Range: 1 - 10
seconds). The minimum value is calculated as (max-age / 2) - 1,
though never greater than 10.
Default Settings
2 seconds
Command Usage
This command is only active in the spanning tree root device. This com-
mand sets the time interval (in seconds) at which the root device transmits
a configuration message.
Example
ecn330(config)# ecn spanning-tree hello-time 5
11.6.3.5.3 max-age
Use this command to configure the spanning tree bridge maximum age
globally for the ECN.
Command level: ecn330(config)#.
Syntax
ecn spanning-tree max-age <seconds>
Arguments:
• max-age <seconds> - Time in seconds. Range: 6-40 seconds.
The minimum value is 2 x (hello-time + 1), though never less than
6. The maximum value is 2 x (forward-time - 1), though never
greater than 40.
Default Settings
20 seconds
To Next Page
Loading...
