EtherWAN EW50 - Page 112

EW50 Industrial LTE Cellular Gateway
112
Set up SCEP
SCEP Configuration
Item
Value setting
Description
SCEP
Unchecked by default
Check the Enable box to activate SCEP function.
Automatically
re-enroll aging
certificates
Unchecked by default
When SCEP is activated, check the Enable box to activate this function.
It will automatically check for certificate aging. If certificate is aging, it will
activate SCEP function to re-enroll automatically.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings