EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
236
selected by default
noAuthNoPriv.
No authentication types or encryption protocols are used.
authNoPriv.
Specify the Authentication and Password.
authPriv.
Specify the Authentication, Password, Encryption and Privacy Key.
Privacy Key
1. String format: any
text
When your Privacy Mode is authPriv, specify the Privacy Key (8 ~ 64
characters) for this version 3 user.
Authority
1. Read is selected by
default
Specify this version 3 user’s Authority that will be allowed Read Only (GET and
GETNEXT) or Read-Write (GET, GETNEXT and SET) access respectively.
OID Filter Prefix
1. Default value is 1
2. Required setting
3. String format: any
legal OID
The OID Filter Prefix restricts access for this version 3 user to the sub-tree
rooted at the given OID.
Value Range: 1 ~2080768.
Enable
1.The box is checked
by default
Click Enable to enable this version 3 user.
Save
N/A
Click the Save button to save the configuration. But it does not apply to SNMP
functions. When you return to the SNMP main page. It will show “Click on save
button to apply your changes” to remind the user to click the main page Save
button.
Undo
N/A
Click the Undo button to cancel the settings
Back
N/A
Click the Back button to return the last page.
Create/Edit Trap Event Receiver
The SNMP allows you to customize your trap event receiver. The router supports up to a maximum of 4 Trap
Event Receiver sets.
When Add button is applied, Trap Event Receiver Rule Configuration screen will appear. The default SNMP
Version is v1. The configuration screen will provide the version 1 required items.

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English