EtherWAN EW50 - Page 237

EW50 Industrial LTE Cellular Gateway
237
When v2c is selected, the configuration screen is exactly the same as that of v1, except the version.
When v3 is selected, the configuration screen will provide more setting items for the version 3 Trap.
Trap Event Receiver Rule Configuration
Item
Value setting
Description
Server IP
1. Required setting
2. String format: any
IPv4 address or FQDN
Specify the trap Server IP or FQDN.
Trap will be sent to the server IP/FQDN.
Server Port
1. String format: any
port number
2. The default SNMP
trap port is 162
3. Required setting
Specify the trap Server Port.
Enter any port number. But you must ensure the port number is not to be used.
Value Range: 1 ~ 65535.