EasyManuals Logo

EtherWAN EW50 User Manual

Default Icon
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
EW50 Industrial LTE Cellular Gateway
265
Up to 10 ports are supported, but they must be separated with “;”,
e.g. 80; 53
Value Range: 1 ~ 65535.
Destination MACs
Optional setting
Define the filter rule with Destination MACs, the destination MAC address of
packets.
Packets which match the rule will be captured.
Up to 10 MACs are supported, but they must be separated with “;”,
e.g. AA:BB:CC:DD:EE:FF; 11:22:33:44:55:66
The packets will be captured when any MAC address is matched.
Destination IPs
Optional setting
Define the filter rule with Destination IPs, which means the destination IP address
of packets.
Packets which match the rule will be captured.
Up to 10 IPs are supported, but they must be separated with “;”,
e.g. 192.168.1.1; 192.168.1.2
The packets will be captured when any IP address in the rule is matched.
Destination Ports
Optional setting
Define the filter rule with Destination Ports, the destination port of packets.
The packets will be captured when any port in the rule is matched.
Up to 10 ports are supported, but they must be separated with “;”,
e.g. 80; 53
Value Range: 1 ~ 65535.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EtherWAN EW50 and is the answer not in the manual?

EtherWAN EW50 Specifications

General IconGeneral
BrandEtherWAN
ModelEW50
CategoryGateway
LanguageEnglish