EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
284
Physical Interface
The box is 3G/4G-1 by
default.
Choose a cellular interface (3G/4G-1 or 3G/4G-2).
Note: 3G/4G-2 is only available for products with dual cellular modules.
SIM Status
N/A
Show the connected cellular service (identified with SIM_A or SIM_B).
Delete Managed
SMS after
Processing
Unchecked by default
Check the Enable box to delete the received managing event SMS after it has
been processed.
Create / Edit SMS Account
Set up the SMS Account for managing the gateway through SMS. It supports up to a maximum of 5 accounts.
You can click the Add / Edit button to configure the SMS account.
SMS Account Configuration
Item
Value setting
Description
Phone
Number
1. Mobile phone number
format
2. Required setting
Select the Phone number policy from the dropdown list, and specify a mobile
phone number as the SMS account identifier if required.
It can be Specific Number, or Allow Any. If Specific Number is selected, specify
the phone number as the SMS account identifier.
Value Range: -1 ~ 32 digits.
Phone
Description
1. Any text
2. Optional setting
Specify a brief description for the SMS account.
Application
Required setting
Specify the application type. It could be Event Trigger, Notify Handle, or both.
If the Phone Number policy is Allow Any, the Notify Handle will be unavailable.
Send
confirmed
SMS
1. Optional setting
2. Unchecked by default
Click the Enable box to activate the SMS response function.
The gateway will send a confirmed message back to the sender whenever it
receives a SMS managing event. The confirmed message is similar to following
format: “Device received a SMS with command xxxxx.”

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English