EW50 Industrial LTE Cellular Gateway
30
WAN Type= PPTP
When selected, "PPTP WAN Type Configuration" will appear. Items and settings are explained below.
Select either Static or Dynamic IP address for PPTP Internet connection.
When Static IP Address is selected, you will need to enter the WAN IP
Address, WAN Subnet Mask, and WAN Gateway.
WAN IP Address (Required setting): Enter the WAN IP address
given by your service provider.
WAN Subnet Mask (Required setting): Enter the WAN subnet
mask given by your service provider.
WAN Gateway (Required setting): Enter the WAN gateway IP
address given by your service provider.
When Dynamic IP is selected, the above settings are not required.