EW50 Industrial LTE Cellular Gateway
31
WAN Type= L2TP
When selected, "L2TP WAN Type Configuration" will appear. Items and settings are explained below.
L2TP WAN Type Configuration
Select either Static or Dynamic IP address for L2TP Internet connection.
When Static IP Address is selected, you will need to enter the WAN IP
Address, WAN Subnet Mask, and WAN Gateway.
WAN IP Address (Required setting): Enter the WAN IP address
given by your service provider.
WAN Subnet Mask (Required setting): Enter the WAN subnet
mask given by your service provider.
WAN Gateway (Required setting): Enter the WAN gateway IP
address given by your service provider.
When Dynamic IP is selected, the above settings are not required.
Enter the L2TP server name or IP Address.
Enter the L2TP username provided by your service provider.
Enter the L2TP connection password provided by your service provider.
Enter the service port for the Internet service.
There are three options:
Auto: Port will be automatically assigned.
1701 (For Cisco): Set service port to port 1701 to connect to
CISCO server.
User-defined: enter a service port provided by your service
provider.
Select Enable to enable MPPE (Microsoft Point-to-Point Encryption)
security for PPTP connection.