EW50 Industrial LTE Cellular Gateway
309
PPTP Server/Client Status
PPTP Server/Client Status shows the configuration for establishing PPTP tunnel and current connection status.
Displays the login name of the user used for the connection.
Displays the public IP address (the WAN IP address) of the connected PPTP
client.
Displays the IP address assigned to the connected PPTP client.
Displays the PPTP client Call ID.
Displays the connection time for the PPTP tunnel.
Displays the Status of each of the PPTP client connection: Connected,
Disconnect, and Connecting.
Click on Edit Button to change PPTP server settings, the web-based utility
will take you to the PPTP server page. (Security > VPN > PPTP tab)
Displays the Name for the PPTP Client specified.
Displays the WAN interface with which the gateway will use to request PPTP
tunneling connection to the PPTP server.
Displays the IP address assigned by Virtual IP server of PPTP server.
Displays the PPTP Server’s Public IP address (the WAN IP address) or FQDN.
Default Gateway /
Remote Subnet
Displays the specified IP address of the gateway device used to connect to
the internet to connect to the PPTP server –the default gateway. Or other
specified subnet if the default gateway is not used to connect to the PPTP
server –the remote subnet.
Displays the connection time for the PPTP tunnel.
Displays the Status of the VPN connection: Connected, Disconnect, and
Connecting.
Click on Edit Button to change PPTP client settings, the web-based utility
will take you to the PPTP server page. (Security > VPN > PPTP tab)