EW50 Industrial LTE Cellular Gateway
308
status.
Displays the login name of the user used for the connection.
Displays the public IP address (the WAN IP address) of the connected L2TP
client.
Displays the IP address assigned to the connected L2TP client.
Displays the L2TP client Call ID.
Displays the connection time for the L2TP tunnel.
Displays the Status of each of the L2TP client connection: Connected,
Disconnect, Connecting
Click on Edit Button to change L2TP server settings, the web-based utility
will take you to the L2TP server page. (Security > VPN > L2TP tab)
Displays Name for the L2TP Client specified.
Displays the WAN interface with which the gateway will use to request PPTP
tunneling connection to the PPTP server.
Displays the IP address assigned by Virtual IP server of L2TP server.
Displays the L2TP Server’s Public IP address (the WAN IP address) or FQDN.
Default
Gateway/Remote
Subnet
Displays the specified IP address of the gateway device used to connect to
the internet to connect to the L2TP server – the default gateway. Or other
specified subnet if the default gateway is not used to connect to the L2TP
server – the remote subnet.
Displays the connection time for the L2TP tunnel.
Displays the Status of the VPN connection: Connected, Disconnect, and
Connecting.
Click on Edit Button to change L2TP client settings, the web-based utility will
take you to the L2TP client page. (Security > VPN > L2TP tab)