EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
44
Query Interval defines the transmitting interval between two DNS Query or
ICMP checking packets.
Loading Check
1. Optional setting
2. Box is checked by
default
Check the Enable box to activate the loading check function.
Enable Loading Check allows the gateway to ignore unreturned DNS
queries or ICMP requests when WAN bandwidth is fully occupied. This is to
prevent false link-down status.
Latency Threshold defines the tolerance threshold of responding time.
Fail Threshold specifies the detected disconnection before the router
recognize the WAN link down status. Enter a number of detected
disconnection times to be the threshold before disconnection is
acknowledged.
Target 1
1. Optional setting
2. DNS1 is selected by
default
Target1 specifies the first target of sending DNS query/ICMP request.
DNS1: set the primary DNS to be the target.
DNS2: set the secondary DNS to be the target.
Gateway: set the current gateway to be the target.
Other Host: enter an IP address to be the target.
Target 2
1. Optional setting
2. None is selected by
default
Target1 specifies the second target of sending DNS query/ICMP request.
None: no second target is required.
DNS1: set the primary DNS to be the target.
DNS2: set the secondary DNS to be the target.
Gateway: set the Current gateway to be the target.
Other Host: enter an IP address to be the target.
Save
N/A
Click Save to save the settings.
Undo
N/A
Click Undo to cancel the settings.

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English