EtherWAN EW50 - Page 57

EW50 Industrial LTE Cellular Gateway
57
Tag-based VLAN – Create/Edit VLAN Rules
The Tag-based VLAN allows you to customize each LAN port according to VLAN ID. There is a default rule that
shows the configuration of all LAN ports and all VAPs. If your device has a DMZ port, you will see DMZ
configuration too. The router supports up to a maximum of 128 tag-based VLAN rule sets.
When thhe Add button is applied, the Tag-based VLAN Configuration screen will appear.
Tag-based VLAN Configuration
Item
Value setting
Description
VALN ID
Required setting
Define the VLAN ID number, range is 6~4094.
Internet
Access
The box is checked by
default.
Click Enable box to allow the members in the VLAN group access to internet.
Port
Unchecked by default
Check the LAN port box(es) to join the VLAN group.
VAP
Unchecked by default
Check the VAP box(es) to join the VLAN group.
Note: Only the wireless gateway has the VAP list.
DHCP Server
DHCP 1 is selected by
default.
Select a DHCP Server for these members of this VLAN group.
To create or edit DHCP server for VLAN, refer to Basic Network > LAN & VLAN >
DHCP Server.
Save
N/A
Click Save button to save the configuration
Note: After clicking the Save button, always click the Apply button to apply the
settings.