EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
74
6in4 WAN Type Configuration
Locate an IPv6 tunnel broker to establish 6in4 tunnel.
Then enter the Local IPv4 address of router into Client IPv4 Address field in IPv6 tunnel broker setting page.
6in4 WAN Type Configuration
Item
Value setting
Description
Remote IPv4
Address
Required setting
Enter Server IPv4 Address from tunnel broker in this field.
Local IPv4 Address
Value auto-created
IPv4 address of this router.
Local IPv6 Address
Required setting
Enter Client IPv6 Address from tunnel broker in this field.
Primary DNS
Optional setting
Enter the WAN primary DNS Server.
Secondary DNS
Optional setting
Enter the WAN secondary DNS Server.
MLD
Unchecked by default
Enable/Disable the MLD Snooping function
LAN Configuration
LAN Configuration
Item
Value setting
Description
Global Address
Required setting
Enter Routed /64 from tunnel broker in this field.
Link-local Address
Value auto-created
Show the link-local address for LAN interface of router.
Then go to Address Auto-configuration (summary) for setting the LAN environment.
When above settings are configured, click the save button to save the configuration and click reboot button to
reboot the router.

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English