EW50 Industrial LTE Cellular Gateway
82
When “TCP & UDP” is selected, protocol of packet filter rule is TCP and UDP.
Public Port is a predefined port from Well-known Service, and Private Port is
the same as Public Port number.
When Public Port is set as Single Port and a port number specified, Private Port
can be set as Single Port number.
When Public Port is set as Port Range and a port range specified, Private Port
can be set to Single Port or Port Range.
Value Range: 1 ~ 65535 for Public Port, Private Port.
When “GRE” is selected, The protocol of packet filter rule is GRE.
When “ESP” is selected, the protocol of packet filter rule is ESP.
When “SCTP” is selected, the protocol of packet filter rule is SCTP.
When “User-defined” is selected, the protocol of packet filter rule is User-
defined. For Protocol Number, enter a port number.
1. Optional setting
2. (0)Always Is selected by
default.
Apply Time Schedule to this rule; otherwise leave it as (0)Always. (refer to
Scheduling setting under Object Definition)
1. Optional setting
2.Unchecked by default
Check the Enable box to activate the rule.
Click the Save button to save the settings.
Click the Undo button to cancel the settings.
When the Back button is clicked the screen will return to previous page.
To Next Page
Loading...
General