EtherWAN EW50 - Page 95

EW50 Industrial LTE Cellular Gateway
95
fields on OSPF protocol.
Backbone
Subnet
1. Classless Inter Domain
Routing (CIDR) Subnet
Mask Notation. (Ex:
192.168.1.0/24)
2. Required setting
The Backbone Subnet of this router on OSPF protocol.
Create / Edit OSPF Area Rules
The gateway allows you to custom your OSPF Area List rules. It supports up to a maximum of 32 rule sets.
When the Add button is applied, the OSPF Area Rule Configuration screen will appear.
OSPF Area Configuration
Item
Value setting
Description
Area Subnet
1. Classless Inter Domain
Routing (CIDR) Subnet
Mask Notation. (Ex:
192.168.1.0/24)
2. Required setting
The Area Subnet of this router in OSPF Area List.
Area ID
1. IPv4 Format
2. Required setting
The Area ID of this router in OSPF Area List.
Area
Unchecked by default
Click Enable box to activate this rule.
Save
N/A
Click the Save button to save the configuration