MAINTENANCE MANUAL
Page 24-24
Effectivity: All
Edition 2 | Rev. 1
1 Pull down the rubber cover of contact (6) and unscrew the screw (2).
2 Remove the washers (4) and (5).
3 In a suitable way, insulate the cable end.
4 In the same way, disconnect the cable (3) of the positive pole.
(d) Cut the lockwire of the lock of buckle (6) or turnbuckle (7).
(e) Unlock the strip attaching the battery (1).
(f) Remove the battery (1) from the holder.
Fig. 24-10 Battery FG Forte – removal / installation (page 1 of 2)
To Next Page
Loading...
