EWM PHOENIX 421 EXPERT forceArc - PHOENIX DRIVE Series Specifications

Technical data
PHOENIX DRIVE 4; 4L; PHOENIX EXPERT DRIVE 4; 4L
Item No.: 099-004833-EWM01 15
3.3 PHOENIX DRIVE 4; 4L; PHOENIX EXPERT DRIVE 4; 4L
PHOENIX DRIVE 4 DRIVE 4L
Supply voltage
42 VAC / 60 VDC
Max. welding current at 60% DC
520 A
Wire feed speed
0.5 m/min to 24 m/min
Standard WF roller fitting
1.0 + 1.2 mm (for steel wire)
Drive
4-roller (37 mm)
Torch connection
Euro-central or Dinse-central
Protection classification
IP 23
Ambient temperature
-10°C to +40°C
Dimensions (LxWxH) [mm]
680 x 460 x 265 690 x 300 x 410
Weight
approx. 24 kg approx. 18 kg
Constructed to standards
IEC 60974 / EN 60974 / VDE 0544
EN 50199 / VDE 0544 Part 206 /
3.4 PHOENIX EXPERT DRIVE 4HS
PHOENIX EXPERT DRIVE 4 HS
Supply voltage
42 VAC / 60 VDC
Max. welding current at 60% DC
520 A
Wire-feed speed
0.5m/min to 30m/min
Standard WF roller fitting
1.0 +1.2mm (for steel wire)
Drive
4-roller (37mm)
Torch connection
Euro-central or Dinse-central
Protection classification
IP 23
Ambient temperature
-10°C to +40°C
Dimensions (L x W x H) [mm]
680 x 460 x 265
Weight
approx. 24.5kg
Constructed to standards
IEC 60974/EN 60974/VDE 0544
EN 50199/VDE 0544 Part 206/