Functional characteristics
MMA welding
Item No.: 099-004833-EWM01 79
5.4.6 Antistick
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the
machine automatically switches over to the minimum
current within about 1 second to prevent the electrode
from overheating. Check the welding current setting
and correct according to the welding task!
Control element Action Result Display
1 x
Select Program sequence mode Program Steps
x x
Select the welding parameters using the key
buttons
"Up" and "Down" (left)
V
Job Nr
Hold
A
M
x x
Adjust the selected welding parameter using the
key buttons
"Up" and "Down" (right)
3 x
Machine returns to Display mode
Basic parameters
Display Meaning / explanation Setting range
Ihot Hotstart current 0% to 200%
thot Hotstart time 0s to 10.0s
tanti Antistick time 0s to 2.0s
To Next Page
Loading...
