EXFO MAX-890 - Page 141

Test Setup - Test Configurator, Timer, and System
MaxTester 133
MAC/IP/UDP
TCP
Allows the selection of the source and destination TCP port number.
 Source Port is configurable from 0 to 65535; the default is 49184.
 Destination Port is configurable from 0 to 65535; the default is
7(echo).
Payload
For RFC 2544 and EtherBERT, indicates that the frame structure contains a
Payload.
For Traffic Gen & Mon, allows the selection of both user defined header
and pattern. Payload is not configurable when the QoS Metrics Tags
Insertion check box is selected (see the Global tab).
 User Defined Header check box when selected (cleared by default)
allows defining a 16-byte header.
 Pattern allows the selection of a pattern: 00 to FF (default is CC).
FCS
Indicates that the frame structure contains an Ethernet FCS.