Test Setup - Test Configurator, Timer, and System
138 MAX-800 Series
Network
VLAN
VLAN Tag check box, when selected (cleared by default), enables and
allows setting up to 3 stacked VLANs.
For each VLAN tag enabled, C-VLAN / S-VLAN / E-VLAN, the following
parameters are configurable.
VLAN ID choices are 0 through 4095; refer to VLAN ID and Priority on
page 467 for more information.
Priority, VLAN user priority, choices are 0 (default) to 7. Refer to VLAN
ID and Priority on page 467 for more information.
Type, VLAN Ethernet Type, choices are 0x8100 (default for C-VLAN),
0x88A8 (default for S-VLAN), 0x9100 (default for E-VLAN), 0x9200,
and 0x9300.
Drop Eligible, when set to Yes (DEI = 1), the transmitted frames will
be dropped first on receipt when congestion occurs under test. Drop
Eligible is not available when VLAN type is 8100. This setting is set to
No by default.
To Next Page
Loading...
