Test Setup - Test Configurator, Timer, and System
MaxTester 155
Services - Profile
Total TX Rate
Note: Only available when the Service Performance Test check box is selected
(see EtherSAM - Global on page 99).
Indicates the total transmit rate of all services enabled for transmission.
Unit selection is available from the SLA Parameters on page 159.
Profile
Profile button allows selecting the emulation profile. The selected
service profile icon, name, and configuration (when applicable) is
displayed next to the Profile button.
Select the emulation profile: Voice, Video, or Data (default).
Voice
Voice Codec choices are VoIP G.711 (default), VoIP G.723.1, and
VoIP G.729.
Number of Calls allows the selection of the equivalent number of
calls that will be generated for the selected stream (default is 1).
CIR indicates the committed information rate in Mbps based on
the number of calls selected.
Video
Video Codec choices are SDTV (MPEG-2) - (default),
HDTV (MPEG-2), and HDTV (MPEG-4). Only SDTV (MPEG-2) is
available with the 10 Mbps interface.
Number of Channels is the equivalent number of channels that
will be generated for the selected service (default is 1).
CIR indicates the committed information rate in Mbps based on
the number of channels selected.
To Next Page
Loading...
